• Software Development (PHX)
• PHX Common Features
• PHX Aeronautical Charting Package
• PHX IFR Procedure Design Package
• Support

PHX IFR Procedure Design Package

• Design all types of IFR procedures
• Document the complete procedure design process in real time by using the built-in Quality Assurance Assistant that can record the following:
• all entered parameters
• results of obstacle analysis
• screen shots
  
• custom commentary
• Calculate and draw the minimum stabilisation distance between two RNAV waypoints
• Calculate and draw the cross-track tolerance (XTT), along-track tolerance (ATT) and half the area width (1/2 A/W) for an RNAV waypoint using the VOR-DME or DME-DME criteria
• Draw the theoretical DME coverage for DME-DME based RNAV procedure
• Draw and analyse precision approaches:
• ILS basic surfaces
• ILS OAS surfaces including automatic OAS constants calculation and allow for steep angle approaches
• Collision risk model (CRM) analysis
• Draw and analyse various holding patterns:
• Race-track holding pattern
• Base turn holding pattern
• Procedure turn holding pattern
• VOR/DME race-track holding pattern
• Holding pattern overhead a VOR or NDB
• Draw and analyse departures:
• Standard departure
• RNAV departure
• Departure nominal track
• Draw and analyse en-route straight and turn segments
• Draw and analyse obstacle limitation surfaces defined by ICAO Annex 14 or UK CAP 168 criteria featuring:
• Runway organisation
• Custom parameters
• Draw and analyse the theoretical safeguarding area and surfaces of navigational aids
• Draw and analyse GPS/GNSS procedures:
• Basic GPS obstacle analyser
• Terminal arrival altitudes (TAA) construction and analysis
• Use various independent tools to design complex procedures:
• Nominal turn construction
• Turn protection area construction
• VOR and NDB radial construction
• Over-head tolerance of a VOR or NDB construction
• Visual circling construction
• Fix area construction using a combination of different types of navigational aids (VOR, NDB, DME)
• Non-precision final approach alignment calculation
• DME tolerance and slant range calculation and construction
• Indicated air speed (IAS) to true air speed (TAS) conversion
• Secondary MOC calculation
• Nominal approach altitudes calculation and construction taking into account the curvature of the earth
• Minimum sector altitude (MSA) construction and analysis

Screenshots

Want more information? Please contact us at asap(at)asap.sk.

PHX Common Features
PHX Aeronautical Charting Package